Gasoline engine 170F TT (with shaft spline, 20 mm) 7 hp
Article: DV-63-170F Product code: 5862
- In stock
Dear customers! We draw your attention to the fact that the complete set of goods in different batches may differ from the photo on the site. Contact our manager to clarify the details of the order.
Description
When choosing an engine for a walk-behind tractor and other equipment, experienced owners take into account the following parameters:
motor power, it must correspond to operating conditions and types of planned work;
the working life of the device as a key factor influencing its service life;
the amount of planned work, since this factor directly affects the engine power.
The motor requires regular maintenance, which should be carried out by trusted specialists at a service center. Changing the oil, cleaning filters and other work can significantly extend the comfortable operation of this device.
Application:
Walk-behind tractors, cultivators, electric generators, motor pumps are just a small list of equipment that this motor is used for. It is widely used in the agricultural sector, as well as when performing gardening work. The power of seven horsepower is considered average, and therefore allows the device to be used for cultivating small fields. Using a walk-behind tractor complete with various attachments, you can perform a number of jobs. For example, mowing, hilling, sowing grain, planting potatoes.
Principle of operation:
The functioning of an internal combustion engine, which is what this device is, is a set of processes. As a result, power is produced, or in other words, force acting on the engine crankshaft. The engine operating cycle consists of such stages as filling the cylinder with a fuel mixture, its compression, ignition of the mixture, expansion of gases, and also cleaning the cylinder from them.
These processes must take place harmoniously, only then the engine fulfills its main function - it powers the type of equipment on which it is installed.
The average consumer often does not know the nuances of the functioning of the device he purchased, so let’s move on to the advantages of this device. They are determined by its technical characteristics.
Advantages
This unit is four-stroke, which provides it with fairly quiet operation, minimal vibration and fewer emissions than its two-stroke counterpart.
This engine is gasoline, which makes its weight relatively light.
The engine starts easily at sub-zero temperatures and can be used at high speeds.
The air cooling system prevents the said device from overheating when exposed to external heat.
The air cooling system is structurally quite simple and is not subject to breakdowns.
The warranty for this device is one year.
You can buy a 170F TT petrol engine with a shaft output for splines (20 mm) on our website. Use your convenient personal account to order.
Attributes
| Main | |
| Compression ratio | 8.5:1 |
| Cooling type | Air |
| Cylinder diameter, mm | 70 |
| Engine mounting holes LxW, mm | 77x162 |
| Engine power, h.p. | 7 |
| Engine volume, cubic cm | 212 |
| engine's type | four stroke |
| Fuel consumption, g/kW*h | 360 |
| Fuel tank volume, l | 3.6 |
| Fuel type | Petrol |
| Gearbox holes closest to the shaft | 65x65 |
| Gross weight, kg | 13 |
| Guarantee | 12 months |
| Ignition system | TCI (transistor magneto) |
| Internal thread | M8 |
| Launch type | Manual starter |
| Lubrication system | splashing |
| Manufacturer | TATA |
| Manufacturer country | China |
| Maximum power, kW / hp / rpm | 5.1/7/3600 |
| Maximum torque, Nm | 14 |
| Oil volume, l | 0.6 |
| Piston stroke, mm | 54 |
| Recommended Oil | SAE 10W-30 |
| Rotation speed, rpm | 3600 |
| Rotation, recoil side | Right (clockwise) |
| Shaft | slotted |
| Shaft diameter, mm | 20 |
| Shaft location | Horizontal |
| Shaft total length, mm | 55 |
| Spline length, mm | 50 |
| Start type | Manual |
Delivery and payment
PAYMENT
You can pay for the goods by prepayment (transfer to a Monobank card, Privatbank or to a current account), as well as order this product by cash on delivery. Payment details will be provided by the manager when placing an order.
DELIVERY
We send orders by courier service Nova Poshta. When placing an order before 14:00 - dispatch on the same day.
Guarantee and returns
Warranty conditions for factory defects
The warranty against factory defects is valid from the moment of actual sale of the product. Warranty period for categories:
- Spare parts - 30 days.
- Tires, rims, wheels - 30 days.
- Equipment - 12 months.
- Engines - 12 months.
- Batteries - 3 months.
- Electric scooters (motor-wheel) - 6 months.
- Bicycle kits (motors, controller, batteries) - 6 months.
If a factory defect is detected, the product is sent back by the buyer with a receipt and a correctly filled out warranty card. After inspection and confirmation of the defect by the company's technical specialist (up to 6 days), the cost of delivery to both sides will be compensated by the company.
Non-returnable or exchangeable goods:
- With damage during installation or dismantling.
- Accepted for installation before checking the characteristics of the ignition system, coil and parts, voltage regulator relay, electrical network.
- Which has undergone constructive deformations during the installation process (transformation of the shape of the product, change of material properties, trimming, grinding, etc.).
- Without original packaging.
- In a different configuration, unlike the one in which it arrived to the buyer.
If you have additional questions, please contact the company manager by phone:
Conditions for returning goods
The term of return of the product from the moment of its actual sale in the online store is 14 days.
How to return the product:
- Contact the online store manager and indicate the reason for the return.
- Specify how convenient it is for you to exchange/return the product.
- Specify the required method of refund to the manager.
Shipping cost:
- Both sides are compensated by the company when the product is returned due to an error by the online store employees - reordering , incomplete packaging.
- Both parties are paid by the buyer upon returning the goods in good condition.
A product that has malfunctioned as a result of improper operation or installation is not subject to return/exchange.
How to protect yourself from receiving goods damaged by the TC
When receiving the goods in the TC department, be sure to check the integrity of the packaging and all contents.
Use your right to demand a certificate from an employee of the transport company, if you discovered:
- Torn packaging of a parcel or container.
- Acceptability of the parcel or its deformation.
- The presence of traces of a fall or impact.
- Signs of other interference.
List the identified deficiencies in the document. Contact our store manager and describe the situation. The transport company is responsible for the integrity of the cargo.
Reviews (0)
Reviews (0)
Add your own review